1x2 ,1x2 Magneto optical swtich
The 1x1 and 1x2 solid -state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate CL 1x1,1x2 fiber optic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time.
The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.
Features
Low Insertion Loss
Wide Wavelength Range
Low Crosstalk
High Stability, High Reliability
Epoxy-free on Optical Path l
Latching and Non-latching
Applications
Metropolitan Area Network
R&D in Laboratory
System Monitoring
Configurable OADM
Specifications
Item | Unit | Parameters | Notes | |
Unidirectional | Bidirectional | |||
Wavelength Range | nm | 1525~1565 | Other band optional | |
Insertion Loss | dB | 0.8 (Typ.); 1.1 (Max.) | 1.0 (Typ.); 1.3 (Max.) | |
PDL | dB | 0.1 (Typ.); 0.2 (Max.) | ||
Return Loss | dB | 40 | 30 | |
Cross-talk | dB | 40 | 35 | Typical >50dB |
PMD | ps | 0.2 | ||
Repeatability | dB | +/- 0.01 | ||
Durability | cycles | > 30 Billions | ||
Switching Speed | μs | Regular (200~400); Ultra-fast (10~30) | Other speed optional | |
Storage Temperature | P0PC | -40~85 | ||
Operating Temperature | P0PC | -5~70 | ||
Maximum Optical Power | mW | 500 | ||
Dimension( L×W×H ) | mm | 28×10×7.8 | ||
Note:
1. All the specifications are based on the devices without connectors, and guaranteed over wavelength, polarization and temperature.
2. Specifications are subject to change without notice.
Dimensions Drawing (mm)
Electrical Specifications
Parameters | Specifications | Unit | |
Regular | Ultra-fast | ||
Switching Speed | 200~400 | 10~30 | μs |
Switching Voltage (VCC) | 5 (+/-5%) | 6.0~7.0 | V |
Switching Current | < 100 | < 350 | mA |
Driving Mode | Voltage or Pulse Driving | Pulse Driving | NA |
Pulse Width (typical) | 1000 | 20 | μs |
Claim Frequency | <800 | < 3000 | Hz |
Pin control signal corresponding to switching status table
Pin1 | Pin2 | The Optical Output Port |
1(Voltage = VCC) | 0(Voltage = GND) | ON |
0(Voltage = GND) | 1(Voltage = VCC) | OFF |
Ordering Information （POSW-MAG-R1C-2505NN）
Model | Port | Working Mode | Switching Speed | Operating Wavelength | Fiber Diameter | Fiber Length | Connector |
POSW-MAG | 11=1X1 12=1X2 XX=other | R=Regular BD=Bidirectional
| 1=200~400us 2=10~30us 3=Others | C=1525~1565 nm L= 1565-1615 nm CL= C & L Band S= Others
| 25=250um 09=900um 20=2.0mm 30= 3.0mm | 05=0.5m 10=1.0m 15=1.5m SS=Specific
| NN=None FU= FC/UPC FA= FC/APC SU= SC/UPC SA= SC/APC LU= LC/UPC LA= LC/APC SS=Specific
|